Testseek.com have collected 16 expert reviews of the Voxelab Aquila S2 and the average rating is 80%. Scroll down and see all reviews for Voxelab Aquila S2.
(80%)
16 Reviews
Average score from experts who have reviewed this product.
Can print at up to 300°C, Direct-drive extruder, Flexible PEI build plate, Good-quality prints out of the box
Manual bed levelling, No touchscreen
If you're interested in getting into 3D printing with high temperature filaments, the S2 is a great, reasonably priced option. The printer includes several quality-of-life improvements over the base Aquila, including a direct drive extruder and flexible m...
Published: 2022-04-05, Author: Mark , review by: mbreviews.com
Direct drive extruder: up to 300 degrees C, Can handle TPU filament with ease, It's relatively fast and, when using PLA, it runs surprisingly silent, Very little vibrations + solid base, Magnetic PEI plate
No filament runout sensor, No dedicated bed leveling adjustments in software, Putting everything together can be made simpler with clearer instructions and especially if the screw busts are labeled
The Design and Build Quality The Voxelab Aquila S2 is pretty much the direct successor to the original Aquila and yes, there have been several other printers released in between, but the actual reasons to upgrade from the first model are the new features...
Includes a good Flexible Magnetic Build plate with smooth and textured sides, Direct drive extruder, Great price point for a printer with its capabilities, Great assembly instructions,
Manual Bed Leveling System, Menu is a bit cumbersome for loading filaments other than PLA and ABS
If you're looking for a budget printer that can handle high-temperature filaments and deliver quality prints, the Voxelab Aquila S2 is your best choice...
Published: 2022-01-21, Author: Michael , review by: the-gadgeteer.com
Easy to assemble, Easy to use, Quiet operation, Direct drive extruding, PEI magnetic build plate, Great performance, Supports multiple filament types,
A more comprehensive user manual
Overall, the Voxelab Aquila S2 FDM 3D Printer is a very impressive 3D printer. It is easy to assemble (despite the awful user manual). It is quiet, easy to use, and offers a lot of value, especially for under $300. In my opinion, the S2 is easy enough for...
Voxlab Aquila S2 provided by VoxelabThe Aquila S2 is a more than just a solid 3D printer that delivers good results out of the box. Only small points of criticism, if any, can be found on the hardware. The firmware provided by Voxelab, on the other hand...
Voxlab Aquila S2 proporcionado por VoxelabLa Aquila S2 es una impresora 3D más que sólida que ofrece buenos resultados desde el primer momento. Sólo se pueden encontrar pequeños puntos de crítica, si es que hay alguno, en el hardware. El firmware proporci...
Published: 2022-06-24, Author: Nicolas , review by: chinahandys.net
Abstract: Mit dem Aquila S2 bringt Voxelab - übrigens eine Tochterfirma des bekannten 3D-Drucker-Herstellers Flashforge - einen Hochtemperatur-3D-Drucker auf den Markt, der sich preislich an Einsteiger und Enthusiasten mit geringem Budget richtet. Hierzu hat der 3D...
Published: 2022-03-22, Author: Michael , review by: mobiflip.de
Abstract: Nach dem Artillery Sidewinder X2 mit dem größeren Druckvolumen steht heute der Voxelab Aquila S2 auf dem Prüfstand. Die Marke Voxelab gehört zu Flashforge und damit zu dem Hersteller, von welchem ich meinen ersten 3D-Drucker im Jahre 2015 in den (Test-)Hä...
Voxlab Aquila S2 zur Verfügung gestellt von VoxelabBeim Auqila S2 handelt es sich um einen mehr als nur soliden 3D-Drucker, der ab Werk gute Ergebnisse liefert. An der Hardware lassen sich, wenn überhaupt, nur kleine Kritikpunkte finden. Bei der von Voxel...
